Roofing

Metal Roof Cost in 2026

A metal roof costs $9 to $20 per square foot installed in 2026. For a typical 1,700 sq ft roof, expect $16,500 to $39,000 for standing seam, or roughly 30–40% less for corrugated panels. Here's the full breakdown.

National average
~$24,500
Per sq ft installed
$9 – $20
Lifespan
40 – 70 years
Advertisement

Metal roof cost breakdown

Metal roofing is priced by the "square" (100 sq ft) and by panel type. The table below breaks down a typical 1,700 sq ft standing-seam steel roof — the most popular residential metal system — into the line items you'll see on a real quote.

Cost itemWhat's includedLow endHigh end
Metal panels & materialsStanding seam panels, trim, clips, fasteners, synthetic underlayment, ice-and-water shield$8,500$17,000
Tear-off & disposalRemoval of the existing roof (one layer), dump fees, cleanup$1,500$3,000
Decking repairReplacing rotted plywood or OSB found after tear-off$500$2,500
Installation laborPanel installation, seaming, flashing and ridge work$5,000$12,000
Flashing & penetrationsChimneys, valleys, pipe boots, vents, snow guards$750$2,500
Permits & inspectionLocal permit and inspections$250$1,000
Total (1,700 sq ft, standing seam)2026 national estimate$16,500$39,000

2026 national estimates for planning. Aluminum panels add roughly 15–25% over steel; copper can exceed $25 per sq ft for materials alone.

Cost by metal roof type

Roof typeInstalled cost per sq ft1,700 sq ft low1,700 sq ft high
Corrugated / exposed fastener$6.50 – $11 per sq ft$11,000$19,000
Standing seam steel$10 – $17 per sq ft$17,000$29,000
Standing seam aluminum$12 – $20 per sq ft$20,500$34,000
Metal shingles / stone-coated steel$9 – $15 per sq ft$15,500$25,500
Copper$25 – $40+ per sq ft$42,000$68,000+

What moves the price

Is metal worth it vs. shingles? Asphalt shingles cost roughly $5,500–$11,000 for the same roof but last 20–30 years. Metal costs about 2–3× more up front and lasts 40–70 years, so over a 50-year window metal usually comes out ahead — especially if you plan to stay in the home.
Advertisement

DIY vs. hiring a pro

DIY: Corrugated metal panels over a simple, low-pitch roof (a barn, garage or straightforward ranch) are within reach of an experienced DIYer and can cut labor costs of $5,000–$12,000. You'll still need permits in most areas, and manufacturer warranties often require professional installation to stay valid.

Hire a pro for: standing seam (it needs specialized seaming tools), steep or complex roofs, and any roof where the warranty matters. A leaking seam or bad flashing job costs far more to fix than the labor you saved. Get at least three itemized quotes and confirm the quote separates materials, tear-off and labor.

Metal roof FAQs

How long does a metal roof last?

Steel standing seam typically lasts 40–70 years; aluminum performs similarly and resists coastal corrosion better. Corrugated panels last 30–45 years with fastener maintenance. Most manufacturers offer 30–50 year paint and panel warranties.

Can metal go over existing shingles?

Sometimes — many codes allow metal over one layer of shingles with furring strips or the right underlayment. It saves $1,500–$3,000 in tear-off, but it hides decking problems and some manufacturers won't warranty it. Ask your roofer to inspect the deck first.

Is a metal roof noisy in the rain?

Installed over solid decking with underlayment, a metal roof is no louder than shingles. The "tin roof" sound comes from panels over open framing, like on barns and sheds.

Does a metal roof raise home value?

Generally yes — metal roofs are a documented selling point, and homeowners often recoup a solid share of the cost at resale thanks to the lifespan and energy reflectivity. Exact payback varies by market.

Does insurance cost less with a metal roof?

Many insurers offer discounts for impact-resistant metal roofing, particularly in hail-prone states. Call your insurer before you sign — the discount can be a few hundred dollars a year.

Related cost guides

Advertisement