A whole-house standby generator costs $10,500 to $17,500 fully installed in 2026 for the popular 20–24 kW size. The generator itself is only about half the bill — installation, the transfer switch and gas work make up the rest.
Based on a 22 kW air-cooled standby generator (the size most 2,000–3,500 sq ft homes choose), installed on an existing natural gas service.
| Cost item | What's included | Low end | High end |
|---|---|---|---|
| Generator unit (22 kW) | Air-cooled standby generator with enclosure and standard 10-year parts availability | $5,500 | $7,500 |
| Automatic transfer switch | 200-amp service-rated switch that senses an outage and starts the generator | $800 | $1,500 |
| Concrete pad & placement | Pre-cast or poured pad, leveling and positioning | $300 | $800 |
| Electrical installation | Licensed electrician: wiring, conduit, panel work and startup | $1,500 | $3,000 |
| Gas line work | Natural gas run from meter, or propane tank and line if no gas service | $500 | $2,500 |
| Battery & cold-weather kit | Starting battery; heater kit recommended in northern climates | $200 | $500 |
| Permits & inspection | Electrical and gas permits, final inspection | $300 | $900 |
| Total (22 kW, fully installed) | 2026 national estimate | $10,500 | $17,500 |
2026 national estimates for planning. Propane installs with a new buried tank can add $2,000–$4,500. Liquid-cooled units (quieter, longer-lived) start around $15,000 installed.
| Size | Powers | Installed low | Installed high |
|---|---|---|---|
| 10 – 14 kW | Essentials: fridge, lights, well pump, furnace fan, some outlets | $7,500 | $11,000 |
| 18 – 20 kW | Most of a mid-size home, one AC unit with load management | $9,500 | $14,500 |
| 22 – 24 kW | Whole home for most houses up to ~3,500 sq ft | $10,500 | $17,500 |
| 26 kW+ | Large homes, multiple AC units, pools and outbuildings | $13,000 | $22,000 |
| Portable (7–9 kW, for comparison) | Manual setup, a few circuits via transfer switch or cords | $1,500 | $3,500 |
DIY: Standby generators are not a DIY project. The work ties into your main electrical service and a gas line — permits, a licensed electrician and usually a plumber or gas fitter are required, and manufacturers can void the warranty on a self-install. What you can do yourself: the pad site prep, clearing the install area, and routine oil/filter changes after the warranty period.
Hire a pro for: the entire installation. Get quotes from generator dealers who service what they sell — the brand's local service network matters more over 15 years than a small price difference today.
Most 2,000 sq ft homes are well covered by a 20–24 kW unit with load management, which can run central AC plus normal household loads. Smaller homes with gas heat and modest loads can do 14–18 kW.
As long as fuel lasts. On natural gas, effectively indefinitely (with oil checks during multi-day runs). On propane, a 250-gallon tank typically gives several days of runtime depending on load.
Modern air-cooled units run around 65–70 decibels at normal load — roughly a loud vacuum cleaner at a few feet. Liquid-cooled models are noticeably quieter. Weekly self-tests are brief and usually programmable to a daytime hour.
In outage-prone areas, yes — buyers value them, and appraisers in some markets credit part of the cost. In areas with very reliable power, treat it as a comfort and safety purchase instead.
Natural gas is cheaper per hour and never needs refilling, but depends on the gas utility staying up (it usually does). Propane is independent of utilities but needs a tank and deliveries. Diesel is mainly for large liquid-cooled units.